Are you tired of that annoying drip, drip, drip coming from your bath tap? Luckily, fixing a leaky bath tap is a common household repair that you can easily do yourself. Follow these 10 simple steps to stop the leak and get your tap working like new again.
Step 1: Gather Your Tools
Before you begin, make sure you have all the necessary tools for the job. You will need an adjustable wrench, screwdriver, replacement washers, and plumber’s tape.
Step 2: Turn Off the Water Supply
Locate the shut-off valve for your bath tap and turn off the water supply. This will prevent any water from flowing while you are working on the tap.
Step 3: Remove the Tap Handle
Use your adjustable wrench to loosen and remove the tap handle. This will expose the inner workings of the tap and allow you to access the faulty washer.
Step 4: Replace the Washer
Inspect the washer for any signs of wear or damage. If the washer is old or worn out, replace it with a new one. Make sure to apply plumber’s tape to the threads of the tap before reassembling.
Step 5: Reassemble the Tap
Put the tap handle back in place and tighten it with your adjustable wrench. Make sure everything is securely in place before turning the water supply back on.
Step 6: Test the Tap
Turn the water supply back on and test the tap to see if the leak has been fixed. If you still notice a leak, you may need to repeat the process or seek professional help.
Step 7: Check for Leaks
Inspect the tap for any remaining leaks. Make sure the tap is completely dry before considering the job complete.
Step 8: Clean Up
Once you are satisfied that the leak has been fixed, clean up any mess that was made during the repair process. A clean bathroom is a happy bathroom!
Step 9: Monitor the Tap
Keep an eye on the tap in the following days to ensure that the leak does not return. If it does, you may need to revisit the repair process.
Step 10: Celebrate Your Success
Congratulations! You have successfully fixed your leaky bath tap and saved yourself the hassle of hiring a plumber. Treat yourself to a relaxing bath as a reward for your hard work.
Fixing a leaky bath tap is a simple DIY project that anyone can tackle. By following these 10 easy steps, you can save time and money by repairing the tap yourself. Remember, if at any point you feel unsure or uncomfortable with the repair process, don’t hesitate to seek professional help.
Have you ever fixed a leaky tap yourself? Share your experience in the comments below!